Eine symmetrische flache Struktur besteht aus acht gleichen Fachwerkstäben, die in Gelenklagern eingebettet sind. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point when the snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at the given deflections.
Eine kugelförmige Ballonmembran wird mit Gas mit Atmosphärendruck und definiertem Volumen gefüllt (diese Werte werden nur für die FE-Modelldefinition verwendet). Determine the overpressure inside the balloon due to the given isotropic membrane prestress. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Eine Struktur besteht aus vier Fachwerkstäben, die in Gelenklagern eingebettet sind. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point, when snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at given deflections.
Zwischen zwei Stützen ist ein sehr festes Seil aufgehängt. Determine the equilibrium shape of the cable (the catenary), consider the gravitational acceleration, and neglect the stiffness of the cable. Verify the position of the cable at the given test points.
In der Mitte der Spannweite eines einfach gelagerten Trägers wird zu einem bestimmten Zeitpunkt eine konzentrierte Kraft aufgebracht. Considering only the small deformation theory, determine the maximum deflection of the beam.
Eine konzentrierte Kraft wird für kurze Zeit in der Mitte eines einfach gelagerten Trägers angewendet. Considering only the small deformation theory and assuming that the mass of the beam is concentrated at its mid‑span, determine its maximum deflection.
Stellen wir uns ein biegesteifes Gerüstrohr vor, das durch einen Knotenlager für Gerüst unten befestigt und sowohl durch ein Moment als auch durch eine Kraft belastet wird. Calculate the maximum deflection with consideration of initial slippage.
A timber beam reinforced by two steel plates at the ends is loaded by pressure. The wood fibers are parallel to the upper loaded side of the beam. Die plastische Oberfläche wird nach der Tsai-Wu-Plastizitätstheorie beschrieben.
Ein gevouteter Kragträger ist am linken Ende vollständig befestigt und am anderen Ende mit einer Dauerlast belastet. Plastic material is considered for the calculation.
Eine Struktur besteht aus zwei Fachwerkträgern, die in die Gelenklager eingebettet sind. The structure is loaded by concentrated force. The self-weight is neglected. Determine the relationship between the loading force and the deflection, considering large deformations.
Ein I-Profil-Kragträger ist am linken Ende gelagert und durch Moment belastet. The aim of this example is to compare the fixed support with the fork support and to investigate the behavior of some representative quantities. Comparison is also made to the solution by means of plates. Small deformations are considered, and the self-weight is neglected. Determine the rotation in the midpoint of the cantilever, and in case of the member entity with warping, determine the values of the primary torsional moment, the secondary torsional moment, and the warping moment both on the left end (point A) and the right end (point B).
Stellen wir uns ein biegesteifes Gerüstrohr vor, das durch einen Knotenlager für Gerüst unten befestigt und sowohl durch ein Moment als auch durch eine Kraft belastet wird. Self-weight is not considered. Considering an infinitely rigid beam, determine the maximum radial deflection.
A steel cantilever with a rectangular cross‑section is fully fixed on one side and free on the other. Das Ziel von diesem Verifizierungsbeispiel ist, die Eigenfrequenzen der Struktur zu ermitteln.
Ein axial belasteter Stahlträger mit quadratischem Querschnitt ist an einem Ende gelenkig gelagert und am anderen Ende federnd gelagert. Two cases with different spring stiffnesses are considered. The verification example solves the calculation of the load factors of the beam in the image using the linear stability analysis.
A timber beam reinforced by two steel plates at the ends is loaded by pressure. The wood fibers are parallel to the upper loaded side of the beam. Die plastische Oberfläche wird nach der Tsai-Wu-Plastizitätstheorie beschrieben.
Eine breite Platte mit Öffnung wird mittels Zugspannung in einer Richtung belastet. The plate width is large with respect to the hole radius, and it is very thin, considering the state of the plane stress.